Silk Glamor Dazzle

Product Data Sheet

Product Description
Silk Glamor Dazzle Luxury Emulsion is a super luxury interior wall paint that transforms your walls with fresh rich, and shiny look. It is formulated with specially formulated acrylic emulsions, which retain the fresh, glossy new look for longer. It is a low-VOC product.

Recommended Use
Plastered surfaces, concrete walls, fiberboards, asbestos, gypsum boards and false ceilings.

Colour Range: Over 2,000 Shades
Finish: High, Medium, Smooth, Matt
Toxicity: Less than 50 gm/lt
Fire Hazard Class: Non-flammable
Pot Life of Thinned Material: Overnight

Coverage
140 -160 sqft/lt/2 coats, under ideal test conditions. (Coverage may depend on factors like surface conditions, surface preparation, application skill, weather conditions, dilution etc.)

Recommended Undercoats
Primer: Silk Luxury Basecoat
Putty: For wall/ plastered surfaces – Happy Wall Putty

Gloss/ Sheen: 60° = 30-40 (depending on shade, measured as per standard test method)

Anti – fungal: Resists growth of algae, fungus and moulds

Drying Time: SD: 15-25 min at 60% RH, 25°C, HD: 6-8 hours

Dilution Ratio: 30-35% by volume (Deep shades from N2 base to be applied without dilution)

Application Method: Brush/ Roller/ Spray

Recommended Thinner: Potable water

Surface Preparation:

For fresh/ new surfaces, ensure the surface is clean and dry and free from all loose particles, chalk, grease, fungus and algae. Sand the surface with Emery Paper No. 80 and wipe clean. Cover fine cracks wit putty, large cracks may need cement work Allow sufficient time for the putty / cement to dry. Apply the first coat of primer and allow it to dry for 6 – 8 hours. Smoothen the surface by applying thin coats of putty to fill in all the dents. Allow the putty to dry overnight. Sand the surface with Emery Paper No. 100 and wipe clean. Apply the second coat of primer and allow it to dry for 6 – 8 hours. Sand the surface with Emery Paper No. 220 and wipe clean.

For Previously Painted Surfaces: Strip the old paint as far as possible. Roughen the unremoved portion with no 180 or no 220 emery paper. Remove all loosely adhering particles or dust.

Directions for Application: For topcoat, dilute the paint as per the recommended dilution ratio. Apply the first finishing coat with brush or roller and allow it to dry for at least 6 -8 hours. After the first coat dries, apply the second coat and allow it to dry overnight.

Cleaning Instructions

• Use only toilet soap to clean stains
• To clean oil-based stains, use mineral turpentine oil only
• Use only a soft white cotton cloth for cleaning
• While cleaning, wipe gently without using pressure
• Attempt cleaning the surface only after one month of application

Points to Note

• Shake well before use
• Do not over dilute
• Keep the container tightly closed to prevent drying
• Use one coat of Bio – Wash for killing fungal growth
• Scrape off old paint thoroughly before painting starts
• Gyro shake well after tinting through CB Machine
• For deep shade apply one additional coat
• Do not apply paint on lime washed surfaces and damp wall
• In case of contact with eyes, wash immediately with water and seek medical help
• Do not apply paint when ambient temperature is below 10° C or above 45° C