Hempaline Prepare 130

Product characteristics

---

Features

• Superb mechanical properties
• Excellent chemical resistance
• Crude oil resistance up to 130°C [270°F]
• Optically Activated Pigment Shade 11153 enables enhanced inspection using UV light
• Touch-up and repair friendly
• Compatible with fast return-to-service linings
• Contact Hempel for UV flashlight specification

---

Product safety

Flash point: 26°C [79°F]

VOC content mixed product:

Legislation	Value
EU	300 g/L [2.50 lb/US gal]
US (coatings)	300 g/L [2.50 lb/US gal]
US (regulatory)	300 g/L [2.50 lb/US gal]
China	300 g/L [2.50 lb/US gal]

See Hempel’s Explanatory Notes for legal details.

Handling
Handle with care. Follow safety labels and consult the Safety Data Sheet.
For professional use only.

---

Product data

• Product code: 17100
• Base: 17109
• Curing Agent: 97011
• Shade: Brownish red 50630
• Gloss: Flat
• Volume solids: 71 ± 2%
• Specific gravity: 1.6 kg/L [14 lb/US gal]
• Reference dry film thickness: 50 micron [2.0 mils]

---

Surface preparation

Cleanliness

• Remove oil, grease with detergent.
• Wash off salts with high pressure fresh water.
• For concrete: as per Hempel’s Specification.

New build

• Abrasive blasting to Sa 2½ (ISO 8501-1) / SP 10 (SSPC)
• Remove dust, blast media

Maintenance and Repair

• As per Hempel’s Specification

Roughness

• Surface profile Medium (G) (ISO 8503-2)

---

Application

Mixing ratio: Base 17109 : Curing Agent 97011 (4:1 by volume)
Stir well before use

Thinner

• Hempel’s Thinner 08450
• Hempel’s Thinner 08630

Cleaner

• Hempel’s Tool Cleaner 99610
• Hempel’s Thinner 08450

Pot life

Temp	Induction	Pot life
15°C [59°F]	20 min	3½ hours
20°C [68°F]	15 min	3 hours

Application method

Tool	Thinning	Parameters
Airless spray	5%	180 bar [2600 psi], nozzle: 0.017–0.019″
Brush	5%	Not applicable

Pressure based on 20°C [68°F] material temperature.

---

Film thickness

Type	DFT (micron)	WFT (micron)	Spread rate
Low	50 [2.0 mils]	71 [2.8 mils]	14 m²/L [570 sq ft/US gal]
High	75 [3.0 mils]	106 [4.2 mils]	9.4 m²/L [383 sq ft/US gal]
Recommended	50 [2.0 mils]	71 [2.8 mils]	14 m²/L [570 sq ft/US gal]

---

Application conditions

• Paint temperature: 15–25°C [59–77°F]
• Substrate must be 3°C above dew point
• Min. surface temp: 10°C [50°F]

---

Drying time

Surface temperature	10°C [50°F]	20°C [68°F]	30°C [86°F]	40°C [104°F]
Touch dry	90 min	60 min	30 min	15 min
Hard dry	11 hours	5 hours	3 hours	1½ hours

At 50 µm [2.0 mils] DFT under standard conditions.

---

Overcoating

Quality name	10°C [50°F]	20°C [68°F]	30°C [86°F]	40°C [104°F]
Hempaline Prepare 130	Min 12 h / Max 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d
Hempaline Defend 630 Cure 72	12 h / 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d
Hempaline Defend 630 Cure 24	12 h / 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d
Hempaline Defend 400 Cure 72	12 h / 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d
Hempaline Defend 400 Cure 24	12 h / 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d
Hempadur 85671	12 h / 120 d	7 h / 120 d	3½ h / 60 d	2 h / 36 d

Consult Hempel’s specification for more information.

---

Drying conditions

• Ensure proper ventilation throughout application and drying.

Overcoating note

• Surface must be clean, dry
• If max interval exceeded: roughening or sweep blasting required

---

Other remarks

• Epoxy coatings may chalk in sunlight. Does not affect performance.
• Hempel’s Specification takes precedence.

---

Storage

Temp	Base	Curing Agent
25°C	12 months	12 months

Store under 40°C, dry, shaded. Check quality post expiry.

---

Carbon Footprint

Thickness	GWP (CO₂e)
1 µm	8.3 g/m²
1 mil	0.043 lb/ft²

Includes materials, transport, production, VOCs. Based on standard shade.

---

References

Product Data Sheet – Hempaline Prepare 130
Issued by Hempel A/S – October 2024
Document Version: 4/4
Source: https://www.hempel.com

Technical Guidelines and Explanatory Notes
Last accessed: 28 May 2025
Reference link: https://www.hempel.com/service-and-support/technical-guidelines

Note: Always consult the latest version of the Product Data Sheet and associated documents directly from Hempel’s official website to ensure accuracy and compliance with the most current recommendations